How To Reset - Konica Minolta Bizhub 162 Service Manual

15. Malfunction code

15.2 How to reset

Code
C0000 Main Motor malfunction
C0044 ADF Cooling Fan Failure
C0045 Fusing Cooling Fan Motor malfunction
Power Supply Cooling Fan Motor malfunc-
C004E
tion
C0070 Toner Replenishing Motor malfunction
C0210 Abnormal image transfer voltage
C03FF Faulty Model Setting
C0500 Warm-up failure
C0501 Warm-up failure 2
Fusing failure
C0510
(abnormally low fusing temperature)
Fusing failure
C0511
(abnormally low fusing temperature 2)
Fusing failure
C0520
(abnormally high fusing temperature)
Fusing failure
C0521
(abnormally high fusing temperature 2)
C0650 Faulty Scanner Home Position Sensor
C0B60 Bin Switching Motor malfunction
C0B80 Shift Motor malfunction
C0F32 Faulty ATDC Sensor
C0F33 Improperly adjusted ATDC Sensor
C1038 Engine connection failure
C1200 Faulty ASIC/memory
C1300 Polygon Motor malfunction
C133B Communication with option error
C133D ROM check error
C13F0 Faulty HSYNC
C1468 Faulty Parameter Chip
C14A3 IR fluorescent lamp fault
134
Description
Field Service Ver. 1.0 Apr. 2005
Procedure
• Turn OFF and ON the Power Switch.
• Make the correct setting for "Model Setting"
of "Adjust" available from the Service mode.
☞
97
• Turn ON the Power Switch with the Stop key
held down.
• Turn OFF and ON the Power Switch.