11. Soft Switch Set - Konica Minolta Bizhub 162 Service Manual

11. Soft Switch Set

11. Soft Switch Set
• This machine is provided with a total of 64 soft switches used for making various adjust-
ments. The initial values can be changed, defined to comply with the requirements
unique to each individual country.
• The initial settings of the soft switches can be changed according to the marketing area.
The settings can be changed when:
The marketing area code is set in the Service mode.
The marketing area code is set using the RSD utility software.
SRAM is cleared using the Service mode. In this case, the initial settings are determined
according to the current marketing area code.
• The bit status can be changed by the following methods:
1. Use Soft Switch available as a Service Mode function.
☞ 85
SERVICE MODE
6.SOFT SWITCH
Hex-binary
conversion list
0
4 (8) 0
3 (7) 0
Bit no.
2 (6) 0
1 (5) 0
2. Use the RSD software function.
100
YES
1 2 3 4 5
0 0 0 0 0
0 0 0 1 1
0 1 1 0 0
1 0 1 0 1
Field Service Ver. 1.0 Apr. 2005
SOFT SWITCH
#01= 10000000
Bit No. 1 2 3 4 5 6 7 8
HEX
6 7 8 9 A
0 0 1 1 1
1 1 0 0 0
1 1 0 0 1
0 1 0 1 0
B C D E F
1 1 1 1 1
0 1 1 1 1
1 0 0 1 1
1 0 1 0 1