Insufficient Memory, Some Held Jobs Will Not Be Restored; Memory Full; Complex Page, Some Data May Not Have Printed; Ppds Font Error - Ricoh M126 Service Manual

37 Insufficient memory, some held jobs will not be restored

The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Touch Continue to clear the message.

38 Memory full

Try one or more of the following:
• Touch Continue to clear the message.
• Cancel the current print job.
• Install additional printer memory.

39 Complex page, some data may not have printed

Try one or more of the following:
•
Touch Continue to clear the message and continue printing.
•
Cancel the current print job.
• Install additional printer memory.

50 PPDS font error

Try one or more of the following:
• Touch Continue to clear the message and continue printing.
•
The printer cannot find a requested font. From the PPDS menu, select Best Fit, and then select On. The printer will
find a similar font and reformat the affected text.
•
Cancel the current print job.

51 Defective flash detected

Try one or more of the following:
•
Touch Continue to clear the message and continue printing.
•
Cancel the current print job.

52 Not enough free space in flash memory for resources

Try one or more of the following:
• Touch Continue to clear the message and continue printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
•
Delete fonts, macros, and other data stored in flash memory.
• Upgrade to a larger capacity flash memory card.
Troubleshooting
257