Ricoh M126 Service Manual page 217

User primary message
Paper Changes Needed
PJL OP Message
PJL Seed Message
PJL ST Message
Remove Paper ADF
Remove Paper Standard
Bin
Restore Held Jobs.
Go/Stop?
Securely Clearing Disk
Space
Unsupported USB Device,
Please Remove
Unsupported USB Hub,
please remove
Unsupported Disk
M126/M127/M128
Change or load new media.
Try one or more of the following:

press Select ( ) to clear the message, and continue
printing.

Wait for the message to clear.
This posts when there is paper detected in the ADF upon
POR or when the cover is closed (or any other situation that
re-initializes the scanner). Message clears when paper is
removed.
The standard output bin is full or nearly full. Remove the
media from the bin.
Held jobs were found on disk after a power on/off reset.
Restoring will make these jobs available. Jobs may also be
restored at a later time by turning off and restarting the
machine.
The following actions can be taken:

Restore

Do not restore

More information
This message appears when all blocks of the disk are
cleared.
Remove the unrecognized device from the USB port on the
front of the machine.
Remove the unrecognized USB hub/device from the USB
port on the front of the machine.
Remove the unsupported disk before continuing.
6-12
Explanation
SM