Confidential And Other Held Jobs Do Not Print; Job Takes Longer Than Expected To Print - Ricoh M126 Service Manual

Confidential and other held jobs do not print

These are possible solutions. Try one or more of the following:
P , ,
ARTIAL JOB NO JOB
The print job may contain a formatting error or invalid data.
•
Delete the print job, and then print it again.
•
For PDF documents, recreate the PDF and then print it again.
M
AKE SURE THE PRINTER HAS SUFFICIENT MEMORY
Free up additional printer memory by scrolling through the list of held jobs and deleting some of them.

Job takes longer than expected to print

These are possible solutions. Try one or more of the following:
R
EDUCE THE COMPLEXITY OF THE PRINT JOB
Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the job.
C P P
HANGE THE AGE ROTECT SETTING TO
1
On the home screen, touch
2
Touch Settings.
3
Touch General Settings.
4
Touch the down arrow until Print Recovery appears.
5
Touch Print Recovery.
6
Touch the arrows next to Page Protect until Off appears.
7
Touch Submit.
8
Touch to return to the home screen.
C
HANGE ENVIRONMENTAL SETTINGS
When using Eco-Mode or Quiet Mode settings, you may notice a short delay before the first page is printed. If you
want to change the settings and need more information, then see "Using Eco-Mode" on page 68 or "Reducing printer
noise" on page 71.
OR BLANK PAGES PRINT
O
FF
.
Troubleshooting
265