Printhead Removal - Ricoh M126 Service Manual

4.2.42 PRINTHEAD REMOVAL

1. Top cover ( p.4-68 "Top Cover Assembly Removal")
2. Right side cover (
3. Disconnect the two cables (A), and unroute them back through the frame toward the
printhead.
4. Remove the three screws (B).

Use a pencil to mark the screw locations of the printhead on the metal frame. Align
the new printhead relative to the location of the old printhead (
Assembly Mechanical Adjustment")
5. Take out the printhead.
SM
p.4-66 "Right Side Cover Removal")
4-61
Removal Procedures
p.5-50 "Printhead
M126/M127/M128