Print Settings; Setup Menu - Ricoh M126 Service Manual

Menu item
Separator Sheets
None
Between Copies
Between Jobs
Between Pages
Separator Sheet Source
Tray <x>
Manual Feeder
Blank Pages
Do Not Print
Print

Print Settings

Setup menu

Menu item
Printer Language
PCL Emulation
PS Emulation
Job Waiting
On
Off
Description
Places a sheet of paper between pages, copies, or jobs based on the value selected
Note: None is the factory default setting.
Specifies a paper source
Specifies whether blank pages are inserted in a print job
Note: Do Not Print is the factory default setting.
Description
Sets the default printer language
Notes:
•
PCL emulation uses a PCL interpreter for processing print jobs.
PostScript emulation uses a PS interpreter for processing print
jobs.
• PCL is the factory default printer language.
•
Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Specifies that print jobs be removed from the print queue if they
require unavailable printer options or custom settings. They are
stored in a separate print queue, so other jobs print normally. When
the missing information and/or options are obtained, the stored
jobs print.
Notes:
• Off is the factory default setting.
•
This menu appears only if a non-Read Only printer hard disk is
installed. This requirement ensures that stored jobs are not
deleted if the printer loses power.
Understanding printer menus
214