Edge To Edge; Enable Edge To Edge Copy; Ep Setup; Ep Defaults - Ricoh M126 Service Manual

Edge to edge

When this setting is On, the text and graphics are shifted to the physical edges of the paper for all
margins. When the setting is Off, the normal margins are restored.

Enable edge to edge copy

The settings are ON and OFF.

5.3.11 EP SETUP

The triangles pointing up or down indicate whether there are additional menus. Touch the up or
down arrows to display these additional menus.

If you make changes, touch "Submit" to make the change effective.

EP defaults

This setting is used to restore each setting listed in EP SETUP to its factory default value.
Sometimes this is used to help correct print quality problems.
To restore EP Defaults:
1. Touch to select "EP Defaults" from EP SETUP.
2. Touch to select "Restore" to reset the values to the factory settings, and touch
select "Do Not Restore" to exit without changing the settings.
Touch "Back" to exit without changing the settings.

Fuser temperature (Fuser temp)

This adjustment can be used to help solve some customer problems with paper curl on low-grade
papers and problems with letterheads on some types of media.
The fuser temperature can be adjusted to: Normal, Lower, Lowest. The default is Normal.
Touch "Back" to return to Diagnostics Menu.
SM 5-41
Diagnostics Menu
to
M126/M127/M128