4.2.29 MULTIPURPOSE FEEDER (MPF) FEED CLUTCH REMOVAL
1.
Left side cover (
p.4-26 "Left Side Cover Removal")
2.
Duplex (
p.4-16 "Duplex Removal")
3.
Disconnect the cable (A) from J24 on the engine board.
4.
Place the printer on its right side.
Be careful to not damage any cables or mar the finish of the printer.
5.
Remove the three screws (B) from the left side of the printer.
SM
4-49
Removal Procedures
M126/M127/M128