4.2.52 WEAR STRIP (550-SHEET TRAY 2) REMOVAL
1.
Use a spring hook to disconnect the strip from the top of the tray.
2.
Lift out the strip.
When replacing the strip (for all trays):
Carefully insert the strip from the top of the tray, and push it down through the
opening until it snaps into place.
Turn the tray over to view the bottom of the strip. Using the spring hook, check to
make sure that the end of the strip is fastened tightly.
Be sure that the drafted edge of the strip is installed toward the bottom of the tray.
M126/M127/M128
4-72
SM