To Clear Jammed Staples In Finisher Fs-609 - Konica Minolta magicolor 8650 User Manual

11
11.3.3

To clear jammed staples in finisher FS-609

Reminder
If the following procedure is not followed and the paper is removed with too much force, the stapler unit
may be damaged.
!
Detail
For details on clearing misfed paper in the finisher, refer to "To clear a paper misfeed in finisher FS-609"
on page 11-38.
1
Remove all paper from the finisher.
2
Open the front door of the finisher.
3
Slowly pull out the stapler unit as far as possible.
4
Turn misfeed-clearing dial 2 clockwise until the cartridge
removal indicators are aligned.
The staple cartridge moves to a position from where it can be
removed.
What should be done if misfeed-clearing dial 2 is turned
?
too far?
% Turn the misfeed-clearing dial 2 counterclockwise to
adjust it so the cartridge removal indicators are aligned.
11-44
Troubleshooting
Removal position
Misfeed-clearing dial 2
magicolor 8650