Clearing Jammed Staples In Finisher Fs-609 - Konica Minolta BIZHUB C203 User Manual

Troubleshooting
4.3.3

Clearing jammed staples in finisher FS-609

Reminder
If the message "Unable to staple." appears, be sure to perform the following procedure.
If the following procedure is not followed and the paper is removed with too much force, the stapler unit
may be damaged.
!
Detail
For details on clearing misfeed paper in the finisher FS-609, refer to "Clearing a paper misfeed in
finisher FS-609" on
1
Remove all paper from the finisher.
2
Open the front door.
3
Slowly pull out the stapler unit as far as possible.
4
Turn misfeed-clearing dial 2 clockwise until the cartridge
removal indicators are aligned.
The staple cartridge moves to a position from where it
can be removed.
What should be done if the misfeed-clearing dial 2 is
?
turned too far?
% Turn the misfeed-clearing dial 2 counterclockwise to
adjust it so the cartridge removal indicators are
aligned.
C353/C253/C203
page 4-49.
Removal
Misfeed-clearing
position
dial 2
4
4-58