Snmp Setting - Konica Minolta magicolor 8650 User Manual

10
10.18.3

SNMP Setting

1
In Administrator mode of PageScope Web Connection, select the Network tab - "SNMP Setting".
2
Specify the following settings.
Item
SNMP
UDP Port Setting
SNMP v1/v2c Setting
Read Community
Name
Write Community
Name
SNMP v3 Setting
Context Name
Discovery User Name
10-82
Definition
Specifies whether to use the SNMP. If yes, specify
whether to use SNMP v1/v2 (IP), SNMP v3, and SNMP v1
(IPX).
SNMP v1 (IPX) can be specified only when IPX is ena-
bled.
Default setting: 161
Specify the UDP port number.
Specify settings for using SNMP v1/v2c.
Specify the community name to be used for scanning (up
to 15 characters).
Specify the community name to be used for reading and
writing (up to 15 characters).
Specify settings for SNMP v3.
Specify the context name (up to 63 characters).
Specify the user name for detection (up to 32 characters).
PageScope Web Connection
Prior confirmation
Protocol to be used
(TCP/IP or IPX/SPX)
magicolor 8650