Adding A Printer (Lpr Settings); Specifying The Tcp/Ip Setting For This Machine (Ipp Settings); Ipp Setting For This Machine; Specifying The Tcp/Ip Setting For The Computer (Ipp Settings) - Konica Minolta magicolor 8650 User Manual

Installing the printer driver for Macintosh

Adding a printer (LPR settings)

1
Select "HDD" - "Applications" - "Utility" where the driver was installed, and then double-click "Printer
Setup Utility" or "Print Center" to open it.
2
When the Add Printer dialog box appears, click the [Add] button. When the printer list appears, click
the [Add] button.
– If available printers have already been set up, the Add Printer dialog box does not appear.
The "Printer Browser" appears.
3
Click the [IP Printer] button.
4
From "Protocol", select "LPD".
5
In "Address", enter the IP address of this machine.
6
Select "KONICA MINOLTA" in "Print Using", select the desired model from the list of models, and then
click the [Add] button.
If the selected printer is registered in the printer list, the setting procedure is completed.
Note
If the Installable Options window appears, proceed to change the option settings as necessary. For
details, refer to "Options" on page 7-4.

Specifying the TCP/IP setting for this machine (IPP settings)

Specify the IP address of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to "Network settings" on page 3-3.

IPP setting for this machine

Enable IPP print in the IPP Setting screen of this machine.
!
Detail
For details on the IPP settings of this machine, refer to "Network settings" on page 3-3.

Specifying the TCP/IP setting for the computer (IPP settings)

Specify the TCP/IP setting for the Macintosh computer connected to this machine.
1
On the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
From "Show", select "Built-in Ethernet".
4
Click the TCP/IP tab.
5
Select "Configure" items according to the settings for the network to which the Macintosh computer is
connected, and then specify the IP address and subnet mask.
6
Click the close button at the upper left corner of the dialog box.
– When the "Apply configuration changes?" message appears, click the [Apply] button.
magicolor 8650
5
5-7