Konica Minolta magicolor 8650 User Manual page 263

9
System Setting Menu
System Settings
Note
When "ON" or "MINIMUM" is specified for [Admin. Sec. Levels] of [Admin. Settings], the password is
required to display the System Setting Menu.
The factory default password is "1 2 3 4 5 6 7 8".
Specify the password in [Admin. Password] accessed by selecting [Admin. Settings] - [Security
Settings].
If an incorrect password is entered, the System Setting Menu does not appear.
When the password became invalid due to an authentication failure and the machine enters the restrict
operation status, restart the machine.
[Date/TimeSettings] - [Time Adjustment] are displayed when "ON" is specified for "NTP Setting" which
is accessible by selecting [Network Settings] - [Detail Settings] - [TimeAdjustmentSet].
The parameters for [TCP/IP], [HTTP Server], [SNMP], [AppleTalk], and [Bonjour] are displayed when
"ON" is specified for [TCP/IP Setting], [HTTPServerSetting], [SNMP Setting], [AppleTalkSetting], and
[Bonjour Setting].
If the network settings are changed, restart the machine to apply changes.
When the power is turned off, then on, turn off the power, wait at least 10 seconds, and then turn it on.
Otherwise, the machine may not operate correctly.
[OpenAPI Settings] - [SSL] are not displayed when the SSL certificate is not installed or "ON" is
specified for [EnhancedSecurity].
[CallRemoteCenter] is not displayed if center registration performed by selecting [Service Mode] -
[CS Remote Care] is not completed. Changing this menu must be performed by a service engineer.
9-12
Network Settings
Printer Settings
System Connection
AppleTalk
Bonjour
TCP Socket
Detail Settings
USB Timeout
Network Timeout
Print XPS Errors
OpenAPI Settings
CallRemoteCenter
Settings for control panel
AppleTalkSetting
Printer Name
Zone Name
Bonjour Setting
Bonjour Name
TCP Socket
TCP Socket ASCII
Network Speed
TimeAdjustmentSet
When InvalidCert.
Ping Confirmation
Access Setting
Enable SSL
Authentication
PortNumberSetting
magicolor 8650