Registering Users; Setup - Konica Minolta magicolor 8650 User Manual

15
15.4.3

Registering users

To register users, connect this machine to a computer, and use PageScope Data Administrator.
!
Detail
Registered user data is stored on the hard disk of the machine. If the user authentication method on the
machine is changed or the hard disk is reformatted, the registered user data is erased.
Note
In order to use PageScope Data Administrator, settings must be specified on the machine and the setup
procedure must be performed. The setup procedure includes installing this device's BioDriver(USB-
Driver), then installing PageScope Data Administrator Bio Plugin.
Reminder
PageScope Data Administrator ver. 3.0 or later must first be installed on the computer. For details on
the operating environment and installation procedure for PageScope Data Administrator, refer to the
user manual for the PageScope Data Administrator.

Setup

1
Turn off the machine with the power switch, and then disconnect this device from the machine.
2
Install BioDriver(USB-Driver).
Plug the cable from this device into the USB port on the computer.
The Found New Hardware Wizard starts.
3
Select "Yes, now and every time I connect a device", and then click [Next].
4
Insert the application CD-ROM included with this device into the CD-ROM drive of the computer.
5
Select "Install from a list or specific location (Advanced)", and then click [Next].
6
Select the "Include this location in the search" check box, check that the application CD-ROM appears
as a location to be searched, and then click [Next].
– If the application CD-ROM does not appear as a location to be searched for the driver, click
[Browse], select the BioDriver (USB-Driver) folder on the CD-ROM, and then click [OK].
The installation begins.
7
Click [Finish].
8
Repeat steps 5 through 7.
The installation of BioDriver (USB-Driver) is completed.
9
Install PageScope Data Administrator Bio Plugin.
Open the DA_Bio_Plugin folder on the application CD-ROM, and then click "setup.exe".
10
Select the language, and then click [OK].
The installer starts up.
11
Follow the instructions that appear on the screen to complete the installation.
12
Click [Next].
13
Select "I accept the terms of the license agreement", and then click [Next].
15-10
Authentication unit (Biometric type AU-101)
magicolor 8650