Authentication unit (Biometric type AU-101)
15.4.2
Machine settings
To use the authentication unit (biometric type), an optional HDD and local interface kit must be installed.
1
From the "Main Menu" on the control panel, display the Admin. Settings screen.
–
For details on displaying the Admin. Settings screen, refer to "Operations for changing numeric
values" on page 9-5.
2
From the Auth Device Setting screen, select "Bio Auth. Setting", and then press the [Menu/Select] key.
3
Specify the settings for "Beep Sound" and "Operation Setting".
–
For "Beep Sound", specify whether or not to raise an electric sound when scan of the vein patterns
in the finger is successfully completed.
magicolor 8650
15
15-7