To Clear Jammed Staples In Finisher Fs-603 - Konica Minolta bizhub C525 User Manual

Replacing toner cartridges and staples and emptying waste containers

To clear jammed staples in finisher FS-603

0 If the message "Staple mode cannot be used." appears, be sure to per-
form the following procedure.
If the following procedure is not followed and the paper is pulled out with
too much force, the stapler unit may be damaged.
1
Slide the finisher away
from the machine.
2
Open the horizontal
transport unit cover, and
then remove any misfed
paper.
3
Close the horizontal transport unit cover.
C252
9
9-37