Troubleshooting
10.3.3
To clear jammed staples in finisher FS-609
Reminder
If the following procedure is not followed and the paper is removed with too much force, the stapler unit
may be damaged.
!
Detail
For details on clearing misfed paper in the finisher, refer to "To clear a paper misfeed in finisher FS-609"
on page 10-34.
1
Remove all paper from the finisher.
2
Open the front door of the finisher.
3
Slowly pull out the stapler unit as far as possible.
4
Turn misfeed-clearing dial 2 clockwise until the cartridge
removal indicators are aligned.
The staple cartridge moves to a position from where it
can be removed.
What should be done if misfeed-clearing dial 2 is
?
turned too far?
% Turn the misfeed-clearing dial 2 counterclockwise to
adjust it so the cartridge removal indicators are
aligned.
8650
Removal
Misfeed-clearing
position
dial 2
10
10-41