Loading Paper Into The Tray 4 (Lct) - Konica Minolta magicolor 8650 User Manual

2
? How is curled paper loaded?
% Flatten the paper before loading it.
How many sheets of paper and other media can be loaded?
?
% Do not load so many sheets of plain paper that the top of the stack is higher than the , mark.
4
Close tray 2.
!
Detail
If special paper is loaded, the paper type setting must be specified. For details, refer to "Paper Settings
Menu" on page 9-17.
Reminder
Be careful not to touch the film.
For details on selecting the size and type of paper loaded in tray 2/3/4/5, refer to "Paper" on page 2-20.
To print on OHP transparencies, envelopes or postcards, use the tray 1 (bypass tray).
2.4.3

Loading paper into the tray 4 (LCT)

0 If the [Power] is turned off, the tray 4 (LCT) cannot be pulled out, even after the tray release button is
pressed. Be sure that the machine is turned on with the [Power].
0 Tray 4 (LCT) is an option.
1
Press the tray release button.
The tray 4 (LCT) slides out from the main unit slightly.
2
Pull out the tray 4 (LCT).
2-30
Before using the machine
Film
magicolor 8650