Konica Minolta magicolor 8650 User Manual page 447

11
Printer
driver
11-50
Symptom
The message "No printers
are connected." or "Print
error" appears.
A postscript error appears.
The machine does not
start printing although the
print job was completed on
the computer.
A printer driver setting can-
not be selected.
The "Conflicts" message
with "Unable to Select" or
"Function Canceled" ap-
pears.
Printing is not performed
as specified.
The watermark cannot be
printed.
Possible cause
The printer driver selected for
printing is not compatible with the
printer controller.
The network cable, parallel cable,
or USB cable is disconnected.
Available memory space is not suf-
ficient.
An error has occurred in this ma-
chine.
Available computer memory space
is not sufficient.
There is an error in the application
software settings.
The file printing settings are incor-
rect.
The printer driver selected for
printing is not compatible with the
printer controller.
The network cable, or USB cable is
disconnected.
An error has occurred in this ma-
chine.
A print job is queued in this ma-
chine, delaying printing.
"Save in User Box" was selected
for the print job.
"Secure Print" was selected for the
print job.
If the account track settings have
been applied, an unregistered ac-
count name (or password) may
have been entered.
Available computer memory space
is not sufficient.
The connection of this machine to
the network is not yet established
(while connecting to a network).
Some functions cannot be com-
bined.
An incorrect combination of func-
tions has been specified.
Incorrect settings are specified.
A combination of functions, al-
though possible in the printer driv-
er, is not possible with this
machine.
The paper size, orientation, and
other settings specified in the ap-
plication have priority over those
specified in the printer driver.
The watermark is not correctly set.
The watermark density is set to a
level that is too low.
Watermarks cannot be printed in
graphics applications.
Troubleshooting
Remedy
Check the printer name selected.
Check that the cable is connected
properly.
Perform a test print to check
whether printing is possible.
Check this machine's control pan-
el.
Perform a test print to check
whether printing is possible.
Refer to the user's manual of the
application software to check the
settings.
Change the settings and try to print
again.
Check the printer name selected.
Check that the cable is connected
properly.
Check this machine's control pan-
el.
Check the job order on the Active
Jobs list of the machine's control
panel.
Check if the print job is stored on
the Box screen of this machine's
control panel.
Check if the print job is held on the
Secure Print User Box screen of
this machine's control panel.
Enter the correct account name (or
password).
Perform a test print to check
whether printing is possible.
Consult with the network adminis-
trator.
Do not try to select settings that
are not available.
Check the settings and specify the
functions correctly.
Check each setting in the printer
driver.
Enter the correct settings in the ap-
plication.
Check the watermark settings.
Check the density settings.
No watermark can be printed in
this case.
magicolor 8650