Konica Minolta magicolor 8650 User Manual page 265

9
Admin. Settings Menu
Admin. Settings
Note
To display the Admin. Settings Menu, the password is required.
Specify the administrator password in [Admin. Password] accessed by selecting [Admin. Settings] -
[Security Settings].
The factory default password is "1 2 3 4 5 6 7 8".
If an incorrect administrator password is entered, the Admin. Settings Menu does not appear.
When the password became invalid due to an administrator authentication failure and the machine
enters the restrict operation status, restart the machine.
[PrintDataCapture] is displayed when "OFF" is specified for [EnhancedSecurity].
[HDD Settings] and [User Box Settings] are displayed when a hard disk drive is installed.
[OverwritePriority] and [HDD EncryptionSet] are displayed when the Security kit is installed.
[EncryptionPassphrase] is displayed when [User-Defined] is specified for [EncryptionSetting].
[AuthDeviceSetting] is displayed when the authentication unit and HDD are installed.
[Finisher Adjust] is displayed when the finisher is installed.
[HDD Installation] is displayed when the hard disk drive is installed.
[Punch OptionSet] is displayed when the finisher is installed.
[Reading Timeout] is displayed when [Biometric] is specified for [Auth. Mode].
9-14
Expert Adjustment
Option Settings
Firmware Update
Stabilization
ColorRegistration
Test Pattern
HDD Installation
Punch OptionSet
AuthDeviceSetting
Settings for control panel
Initialize+Stabi.
StabilizationOnly
Yellow
Magenta
Cyan
Gradation Pattern
Halftone Pattern
Punch Kit Type
# of Holes
Auth. Mode
Reading Timeout
magicolor 8650