Troubleshooting
11.3.2
Clearing jammed staples in the saddle stitcher
!
Detail
For details on clearing misfed paper in the finisher, refer to "Clearing a paper misfeed in finisher FS-519"
on page 11-32.
For details on clearing misfed paper in the saddle stitcher, refer to "Clearing a paper misfeed in the
saddle stitcher" on page 11-37.
1
Remove all paper from the finisher.
2
Raise the output tray, and then push down the staple cartridge
holder to remove it.
3
Raise the shutter of the staple cartridge holder, and then
remove one sheet of staples.
4
Return the shutter of the staple cartridge holder to its original position.
5
Insert the staple cartridge holder, and then push it up until it
locks into place.
–
When inserting the staple cartridge holder, be sure to
insert it so that it faces the correct direction.
6
Return the output tray to its original position.
magicolor 8650
11
11-43