Konica Minolta magicolor 8650 User Manual page 282

Settings for control panel
Note
[Firmware Update] requires you to access the FTP server where the update data is stored. For details,
refer to "Using the TCP Socket/OpenAPI/FTP server function" on page 10-97
1
Press the [Menu/Select] key on the control panel of this machine.
2
Select [Admin. Settings], and then press the [Menu/Select] key.
3
Enter the administrator password, and then press the [Menu/Select] key.
4
Select Firmware Update, and then press the [Menu/Select] key.
5
Select Start, and then press the [Menu/Select] key.
The Firmware Update preparation begins.
6
Access this machine, which is specified as the FTP server, and login.
– If you use the Internet Explorer ver.6, you can login as follows.
In the "Address" bar, enter "ftp://<IP address of this machine>".
Select "Login As" from the "File" menu.
Enter User name and Password, and then click Log On.
– User name: update
Password: update
7
Transfer the update file to this machine.
8
Press the [Menu/Select] key on the control panel of this machine.
Data download begins.
9
After download is completed, this machine is rebooted.
– This machines automatically rebooted in a short time after data download. Update is completed
when the machine is rebooted.
10
After rebooted, press the [Menu/Select] key.
Note
If the [Firmware Update] is failed, the "Failed" message appears. Press the [Menu/Select] key, resume
the previous version firm, and then execute the [Firmware Update] again.
magicolor 8650
9
9-31