Specifying The Snmp Setting - Konica Minolta PCL-400 User Manual

Specifying the SNMP setting

1
In the "NETWORK SETTING" menu, press the [,] or [+] key until "SNMP
SETTING" is selected, and then press the [OK] key.
2
Press the [,] or [+] key until "DISABLE" or "ENABLE" is selected, and then
press the [OK] key.
– Whether "DISABLE" or "ENABLE" is selected, the message "ACCEPT-
ED" appears, and then the "NETWORK SETTING" menu appears again.
7-18