Snmp Setting - Konica Minolta magicolor 8650 User Manual

PageScope Web Connection
9.18.3

SNMP Setting

In Administrator mode of PageScope Web Connection, select the Network tab - "SNMP Setting".
Specify the following settings.
Item
SNMP
UDP Port Setting
SNMP v1/v2c Setting
Read Community Name
Write Community Name
SNMP v3 Setting
Context Name
Discovery User Name
Read User Name
Security Level
auth-password
8650
Definition
Specifies whether to use the SNMP. If yes, specify whether
to use SNMP v1/v2 (IP), SNMP v3, and SNMP v1 (IPX).
SNMP v1 (IPX) can be specified only when IPX is enabled.
Default setting: 161
Specify the UDP port number.
Specify settings for using SNMP v1/v2c.
Specify the community name to be used for scanning (up to
15 characters).
Specify the community name to be used for reading and
writing (up to 15 characters).
Specify settings for SNMP v3.
Specify the context name (up to 63 characters).
Specify the user name for detection (up to 32 characters).
Specify the name of read only user (up to 32 characters).
Specify the security level for read only user.
Specify the read only user authentication password to be
used for authentication (up to 32 characters).
9
Prior confirmation
Protocol to be used
(TCP/IP or IPX/SPX)
9-67