Snmp Setting Function; Changing The Auth-Password And Priv-Password - Konica Minolta bizhub 654e User Manual

2.18

SNMP Setting Function

2.18 SNMP Setting Function
When access to the machine by the administrator of the machine through the Administrator Settings is au-
thenticated, the machine enables changing of the SNMP v3 Write User Password (auth-password, priv-pass-
word) required for accessing the MIB object over the network using the SNMP from the PC. In PageScope
Web Connection, import/export of the Device Setting is enabled, allowing the setting for Security Level of
SNMP v3 Setting to be saved or the saved backup data to be restored.
The auth-password and priv-password are controlled based on passwords that meet the Password Rules
and the password entered is displayed as "*" or "-."
NOTICE
Operate the machine with the SNMP function disabled. If it is unavoidable to use the SNMP function, make
sure of utmost security during its use and be sure to disable it after use.
2.18.1

Changing the auth-password and priv-password

<From the Control Panel>
0 For the procedure to call the Administrator Settings on the display, see page 2-2.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
1
Call the Administrator Settings on the display from the control panel.
2
Touch [Network Settings].
3
Touch [SNMP Settings].
bizhub 754e/654e
2
2-93