Snmp Setting Function; Changing The Auth-Password And Priv-Password - Konica Minolta bizhub C3110 User Manual

2.11

SNMP Setting Function

2.11 SNMP Setting Function
When access to the machine by the Administrator of the machine through the Administrator Settings is au-
thenticated, the machine enables changing of the SNMP v3 Write User Password (auth-password, priv-pass-
word) required for accessing the MIB object over the network using the SNMP from the PC.
Each of the auth-password and priv-password can consist of 8 to 32 digits. The password entered for the
authentication purpose appears as "●" on the display.
2.11.1

Changing the auth-password and priv-password

0 For the procedure to access the Administrator Mode, see page 2-2.
0 Do not leave the machine with the Administrator Mode setting screen left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Administrator Mode.
1
Start PageScope Web Connection and access the Administrator Mode.
2
Click the [Network] tab and [SNMP Settings].
3
Click the [Change Password] check box and enter the auth-password and priv-password in the boxes
marked by the rectangle, that is, the Write side SNMP v3 Setting.
% The default setting of auth-password and priv-password is the MAC address set in the machine.
4
Click [Apply].
% If the entered auth-password or priv-password does not meet the requirements of the Password
Rules, a message that tells that the entered auth-password or priv-password cannot be used ap-
pears. Enter the correct auth-password or priv-password. For details of the Password Rules, see
page 1-9.
bizhub C3110
2
2-25