Snmp Setting Function; Changing The Auth-Password And Priv-Password; From The Control Panel - Konica Minolta bizhub C300 Users Manual [Security Operations

2
2.12

SNMP Setting Function

When access to the Administrator Setting mode by the Administrator of the
machine is authenticated, the machine enables changing of the SNMP v3
Write User Password (auth-password, priv-password) required for accessing
the MIB object over the network using the SNMP from the PC.
Each of the auth-password and priv-password can consist of 8 to 32 digits.
The password entered for the authentication purpose appears as "*" or "●"
on the display.

2.12.1 Changing the auth-password and priv-password

Note
Do not leave the machine with the Administrator Setting mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Administrator Setting mode.
<From the Control Panel>
0 For the procedure to call the Administrator Setting mode to the display,
see "Accessing the Administrator Setting mode" on page 2-2.
1
Call the Administrator Setting Mode to the screen from the control pan-
el.
2
Touch [Network Setting].
2-72
Administrator Operations
C300