Step 1 - Import Engine-Specific Settings; Step 1A - System; Step 2 - Set Throttle Limits - Seastar Solutions Optimus 360 Installation Manual

notIce
© 2014 SeaStar Solutions
b.3.3 Step 1 – Import engine-Specific Settings
On the Setup tab of the Joystick interface, click Import engine
Specific Settings. A dialog will pop up, click yes to confirm.
A file selector will open. From the engine(s) listed, choose the one
that matches yours and click open. Click yes at the dialog prompts
to write and confirm the imported settings.
Figure B-6.
b.3.4 Step 1a – System
Return to the Setup tab. Set the Joystick Instance to either Main or
Second. In most cases you will be doing the setup with the main
joystick.
Figure B-7. The System parameters section of the Setup tab.
b.3.5 Step 2 – Set throttle Limits
In this step you will configure:
• the maximum throttle percent at which the engines are at idle and
• the maximum throttle percent intended for joystick use.
Perform this step with the boat safely secured, or in an open area.
If you are having problems getting an engine to idle, or if it is idling
intermittently at different RPMs, confirm that your engine's throttle
position sensor (TPS) is functioning properly.
Optimus 360 Installation Supplement, Rev. B
b-7