Seastar Solutions Optimus 360 Installation Manual page 60

9-6
Figure 9-7.
5. Repeat steps 2 and 3 with the port engine in reverse gear. This
time, change the port Idle rev throttle parameter.
6. Put the port engine in forward gear and slowly increase the
throttle until the engine reaches approximately 1800 RPM.
Adjust the port max fwd throttle parameter so it matches the
current Port Throttle Position.
7. Put the port engine in reverse gear and slowly increase the
throttle until the engine reaches the maximum desired RPM for
joystick operation. This will be either:
a. The maximum throttle just before cavitation, or
b. if cavitation does not occur, the maximum throttle for
comfortable use.
Adjust the port max rev throttle parameter until it matches the
current Port Throttle Position.
8. Press Save to save changes and return to the previous menu.
Repeat these steps for the starboard engine.
© 2014 SeaStar Solutions Optimus 360 Installation Supplement, Rev. B