Updating Joystick Firmware; Basic Import Procedure - Seastar Solutions Optimus 360 Installation Manual
Joystick control system for engines with integrated electronic shift and throttle
Hide thumbs
Also See for Optimus 360:
- Operation manual (76 pages) ,
- Operating instructions & user manual (80 pages) ,
- Configuration and commissioning (17 pages)
Table of Contents
Advertisement
© 2014 SeaStar Solutions
9.3.3
updating joystick firmware
In general, system firmware should always be updated using the
'Update All' utility described in Appendix E of the Optimus EPS
Installation Manual (Book 50).
If you have a situation in which you feel you need to update the
joystick firmware on its own, please contact SeaStar Solutions
technical support.
9.3.4
basic Import procedure
1. Connect all destination joysticks to the network. On the CANtrak,
navigate to dealer menu > Settings > joystick > Import Settings.
2. The display will show a list of available .xcu files on your USB
drive. Find the one you want to use and press Select.
3. At the confirmation prompt, press Yes to continue. The joystick
tuning file will be imported to all connected joysticks.
4. Press
Turn the ignition off, wait at least five seconds, then turn it
on again.
Optimus 360 Installation Supplement, Rev. B
repeatedly to exit. You will be prompted to cycle power.
9-17
Hide quick links:
Advertisement
Table of Contents
