System Setup; System Parameters - Seastar Solutions Optimus 360 Installation Manual
Joystick control system for engines with integrated electronic shift and throttle
Hide thumbs
Also See for Optimus 360:
- Operation manual (76 pages) ,
- Operating instructions & user manual (80 pages) ,
- Configuration and commissioning (17 pages)
Table of Contents
Advertisement
display Station
System type
number of engines
number of [component]
rpm Source
tachometer ppr
© 2014 SeaStar Solutions
B.2 System Setup
Basic system configuration is set through the color CANtrak display
parameters. The display then broadcasts these settings to all the
system devices connected to the network.
Access the parameters by double-clicking on Main Color Display in
the Datalink workspace, then clicking on the Configuration tab.
Remember to click write after making any changes.
b.2.1
System parameters
Figure B-2. Color display – System parameters.
Set the instance of the display. The default is Main; you only need to
change the second station display instance.
Set the appropriate system type from the drop-down list.
At the time of printing only twin engine configurations are supported,
except on Yamaha DEC systems, for which triple-engine configurations
are supported.
Enter the quantity of each listed component in your system.
Set to Electronic Engines.
Not applicable
Optimus 360 Installation Supplement, Rev. B
b-3
Hide quick links:
Advertisement
Table of Contents
