Step 10 - Save The Joystick Tuning File - Seastar Solutions Optimus 360 Installation Manual

© 2014 SeaStar Solutions
9.2.10 Step 10 – Save the joystick tuning file
The joystick tuning file should be saved as a backup in the event of a
joystick failure. You will also need to email a copy of the tuning file to
SeaStar Solutions as part of the post-installation warranty checklist.
1. Insert a USB flash drive in the USB port on the back of the
CANtrak display.
2. Navigate to dealer menu > devices > main joystick > export
Settings. You will see the Export Settings menu, with options for
Internal Memory and USB Memory.
Figure 9-15.
3. Highlight uSb memory and press Select.
4. The display will save the configuration file to the USB drive and
display a message when finished.
Notes:
• The display will create a folder on the USB drive called 'Optimus,'
and a sub-folder named 'Joystick,' into which the configuration file
will be saved.
• It will save the configuration file with the name [serial number of
the joystick].xcu. Be sure to give the file a unique, meaningful name
for later use. You can't do this from the display; you will need to
insert the USB drive into a computer to rename the file. (See
Appendix E of the Optimus EPS Installation Manual (Book 50) for
recommendations.)
• Configuration files exported by the display have the extension
.xcu. This is different than the .ecu extension generated by
Datalink. Only .xcu files can be imported using the CANtrak
display. Don't change the extension when you rename the file.
Optimus 360 Installation Supplement, Rev. B
9-15