Part 2: System Calibration, Purging And Setup - Seastar Solutions Optimus 360 Installation Manual

3-2
COMPONENT
Steering Helm
CANtrak Display
Hydraulic Pumps
SmartCylinders
Steering Service Valves
System Plumbing
Base (EPS) System Wiring
Joystick
Control Head (by Yanmar)
Control Head (by others)
360 System Wiring
Table 3-1. Component list and installation references.
3.2.2 part 2 – System calibration, purging and Setup (Section 4.0)
The system calibration, purging and setup must be done in the correct
order as defined in Table 3-2.
STEP DESCrIPTION
1 Initial Setup
2 Purging Steering
System
3 Calibration
4 Control Head and
Gateway Setup
5 Sea Trial
6 Joystick Setup
Table 3-2. System setup order of operations.
© 2014 SeaStar Solutions
rEfErENCE DOCUMENT
Optimus EPS Installation Manual (Book 50)
This document (Section 3.3)
This document (Section 8.1)
Refer to engine manufacturer's documentation
This document (Sections 3.4, 3.5, and engine
manufacturer-specific sections )
rEfErENCE DOCUMENT
This document (Section 4)
Optimus EPS Installation Manual (Book 50)
Optimus EPS Installation Manual (Book 50)
This document (manufacturer-specific
sections 5-8)
Optimus EPS Installation Manual (Book 50)
This document (Section 9)
Optimus 360 Installation Supplement, Rev. B