Installing The Joystick; Joystick Types - Seastar Solutions Optimus 360 Installation Manual

© 2014 SeaStar Solutions

3.3 Installing the Joystick

Install the joystick on the dash in an area that allows convenient,
unobstructed access. Whenever possible, mount the joystick on a
horizontal surface in a location that will minimize water spray.
Install the joystick using the hardware provided in the kit. The joystick
harnesses must be strain relieved to one of the mounting studs
using the cable tie provided with the joystick hardware.
A dash cutout template is provided in Appendix A.
3.3.1

joystick types

There are two types of joysticks: master and additional station. Every
installation must have at least one master joystick, which comes
factory configured for the number of engines in the installation. The
master joystick can be installed at any control station – the joystick
type is independent of the joystick station.
If there is no master joystick in the system you will get a persistent
"Missing Master Joystick" warning on the CANtrak display. Similarly,
if the master joystick type doesn't match the configured number of
engines, the CANtrak will display a persistent "Invalid Joystick
Configuration" warning.
Table 3-3 lists the available joysticks at the time of printing.
JOySTICk PArT NO.
EJ1400
EJ1403
EJ1404
EJ1401
Table 3-3. Available joysticks.
Optimus 360 Installation Supplement, Rev. B
DESCrIPTION
Joystick, Master, Twin Engine
Joystick, Master, Triple Engine, Tiebar
Joystick, Master, Quad Engine, Tiebar
Joystick, Additional Station
3-3