Seastar Solutions Optimus 360 Installation Manual page 36

6-10
6. When all lever positions have been set, and the screen shows
check marks next to all of them (see Figure 6-14), return the
control levers to the neutral position and click ok to save the
calibration.
Figure 6-14. Save calibrated values.
7. You will be prompted to calibrate the second remote control. If the
boat has a second remote control, calibrate it now. If the boat has
only a single remote control you will use the joystick lever to perform
the calibration. Use table 6-1 to find the joystick position that
corresponds with each lever position shown in the calibration
wizard. Move the joystick all the way in each required direction,
then click Set.
Step Suzuki Lever
Position
1 Reverse Max
2 Reverse Min
3 Neutral
4 Forward Min
5 Forward Max
Table 6-1. Lever to joystick position cross-reference.
8. After you have clicked ok to save the calibration you will see a
final dialog box indicating that the system calibration has been
completed. Click ok to return to the main menu.
© 2014 SeaStar Solutions
Joystick Equivalent
Position
Reverse
Port
Center
Starboard
Forward
Optimus 360 Installation Supplement, Rev. B