Seastar Solutions Optimus 360 Installation Manual page 18

warnInG
cautIon
do not connect anything other
than SeaStar optimus compo-
nents, or SeaStar approved
autopilots, to the can2 network.
3-6
faILure to Secure harneSS may reSuLt In harneSS wear,
cauSInG LoSS of SteerInG controL, property damaGe,
perSonaL Injury and/or death .
ALL NUTS DOUBLE
CHECKED FOR TIGHTNESS
AND MARKED
EACH CABLE
APPROPRIATELY
SECURED AND
STRAIN RELIEVED
CLOSE TO TEES
NO PULLING
ON TEES
Figure 3-3. Correct CAN2 Tee Installation Example.
CM20064
SCREWS IN ALL
MOUNT HOLES
Figure 3-4. Alternative CAN2 6-port hub connection.
© 2014 SeaStar Solutions
NOTE: TEES MAY NOT LOOK
Optimus 360 Installation Supplement, Rev. B
SCREWS IN ALL
MOUNT HOLES
EXACTLY AS SHOWN