Installation Of The Dynamic Scale (Optional) - Neopost IJ 80 User Manual

- Align the dynamic scale with the franking machine;
- Push the dynamic scale towards the machine, taking care to
- Thread the dynamic scale screw in the franking machine. Then,
tightening knob
- Align the feeder with the dynamic scale;
- Push the feeder towards the dynamic scale, taking care to keep
- Thread the feeder screw in the dynamic scale. Then, using the
4130161A/B
29/03/2007

1.2.5 Installation of the dynamic scale (optional)

The equipment including a dynamic scale (the whole
system representing approximately 55 kg) requires the
use of a steady and rigid table, in order to prevent any
weighing problem. Be sure not to install the machine in
an area exposed to the sunlight or to draughts.
keep the centering pin aligned as indicated;
using the knurled tightening knob, push and screw to lock (if the
two devices are not closing properly, slightly rotate the gear
protruding from the dynamic scale and repeat the operation).
(on the side)
the centering pin aligned as indicated;
knurled tightening knob, push and screw to lock (if the two
devices are not closing properly, slightly rotate the gear protruding
from the feeder and repeat the operation).
centering pin
(gear)
Overall presentation
ORIG0008-25
25