Timeout - Neopost IJ 80 User Manual

After selecting "TIME OUT" in the main supervisor menu, the
screen below is displayed:
The next delays are determined by the supervisor (between 0 and
3600 seconds, with increments of 1 second) and are expressed
in seconds:
- START: waiting time for the first document with the transport
- STOP: time-out before the machine stops after the last document
- STANDBY: time-out before the printhead returns to the protection
- SLEEP: time-out before the machine goes into sleep mode
4130161A/B
29/03/2007

4.3.3 Timeout

TIMEOUT (SEC)
START(10 - 9999)
STOP (1 - 9999)
STANDBY (1 - 9999)
SLEEP (30 - 9999)
ESCAPE
motor in operation (this is not settable with an autofeed attached).
processing.
position, after the motor stops (advised value: 150 s).
after the printhead returns to the protection position (advised
value: 120 s).
To modify the "SLEEP" time, enter the desired time (in
seconds) using
access to a numeric screen and enter the desired precised
value. Confirm with
In inserter mode ON, the timeouts are maintained but are
not taken into account.
96 Supervisor Mode
- 0015 +
0015
- 0005 +
0005
- 0120 +
0120
0240
- 0240 +
and keys, or touch
-
+
.
OK
ORIG0008-96
SUP
to
0240