Neopost IJ 80 User Manual page 123

Poor moistening or no
moistening (mixed-mail
feeder).
4130161A/B
29/03/2007
PROBLEM
Poor printing quality.
Envelopes are stained.
Poor moistening or no
moistening (standard
automatic feeder).
SOLUTION
- See paragraph "Cleaning the
printhead".
- Make sure that the side drawer is
properly closed.
- Make sure that the side drawer is
properly closed.
- Clean rollers (see "General
maintenance" section) and the
table.
- Is the machine in the moistening
mode?
- Make sure that the bottle is not
overfilled or empty.
- Slightly shake the bottle to
eliminate air bubbles.
- Check the brush and the sponges
(see "General maintenance"
section).
Is the moistening mode selected
appropriate?
- Make sure that the bottle is not
overfilled (see section A, "Filling
of the water bottle").
- Gently shake the water bottle in
order to eliminate air bubbles.
- 1: increase the moistening level.
- 2: if step 1 is not effective, clean
the filter (see
Maintenance" in section C).
- 3: if step 2 is not effective, clean
the moistening ramp.
Trouble shooting 123
ORIG0008-123
"General