Ds Tests; Touchscreen Calibration - Neopost IJ 80 User Manual

This function can only be used at the technical department's request.
By selecting "TOUCHSCREEN CALIBRATION" in supervisor
setup screen, the calibration input box is displayed:
Touch the screen; then four crosses will be displayed (one by one)
like this:
Touch the crosses; then the following is displayed (if not, try
again):
4130161A/B
29/03/2007

4.3.5 DS tests

4.3.6 Touchscreen calibration

INFO
INFO
Touch the screen to come back to the main supervisor menu.
98 Supervisor Mode
Touchscreen Calibration
Aim the targets with a fine pen
Touch the screen to begin
Calibration was Successful
Touch the screen to continue
ORIG0008-98