Time Screen; Network Screen - Extron electronics TLP 1000MV User Manual

Time Screen

Figure 15.
Use the
NOTE:

Network Screen

Figure 16.
To set the IP address or subnet mask, press the appropriate button. When one of the
buttons is selected, an on-screen keypad appears that allows the user to select "
or digits between
NOTE:
Toggle between
(DHCP). This determines whether the unit will have a permanent IP address or will have
one provided by the network, when required. The default setting is
Main
Month: 07
Volume
Down
Time
Day: 06
Network
Down
Video
Year: 2009
Down
Exit
Time Screen
or buttons to adjust the Month, Day, Year, Hours, and Minutes.
Down Up
The Hours value uses the 24-hour clock. For 10 am, set hours to
10 pm, set hours to
Main
IP Address
Volume
192.168.254.254
Time
Subnet Mask
Network
255.255.0.0
Video
DHCP
Off
Exit
Network Screen
and , and "
0 9
The factory default IP address for both the TLP 1000MV and TLP 1000TV is
. The default subnet mask is
192.168.254.254
your IT department to ensure these addresses are correctly assigned.
On and Off to enable or disable Dynamic Host Configuration Protocol
TLP 1000MV and TLP 1000TV • Initial Configuration and Calibration
Hours: 13
Up Down Up
Minutes: 32
Up Down Up
Up
.
22
MAC: 00-05-A6-07-3A-55
1 2
4 5
7
8
. 0
" (dot).
.
; for
10
3
6
9
Clear
Clear
. Consult with
255.255.0.0
.
Off
,"
16