Id Management; Time Delay Requirements - Extron electronics TouchLink Series Best Practices Manual

TouchLink Touchpanel Best Practices
™

14. ID Management

Use caution when assigning IDs to your buttons . The "Where Used" window in GUI Configurator is a useful tool for
tracking and managing the button IDs . Additionally, the "Show Control Info" option under the "Window" menu indicates
which ID is currently assigned to each button .
Enabling Where Used Window
Enabling Show Control Info opton
To export the completed GUI project and import that project to
Global Configurator, please refer to the How Do I . . .? document .

15. Time Delay Requirements

Any control that requires time delay must be configured from Global Configurator . For example, "System ON" button
needs a time delay to allow the projector to warm up . Leave this button un-configured in GUI Configurator and configure it
from within Global Configurator .
Page 10