Updating The Firmware; Updating Firmware Using Extron Firmware Loader - Extron electronics TLP 1000MV User Manual

5.

Updating the Firmware

Firmware for both touchpanels can be upgraded using the
using the
consult your IT team and ensure that the touchpanel has a unique IP address.

Updating Firmware Using Extron Firmware Loader

1.
2.
Click the Touchpanel tab to open the Touchpanel Configuration page, which allows
the user to alter the touchpanel and volume settings. These correspond to the
settings (see page 14) and
Figure 22. Touchpanel Configuration Page
TLP 1000 default web
Power on a computer that is connected to the same network as the touchpanel.
Install the Extron Firmware Loader utility onto the computer if it is not already present.
This is on the software disc that ships with unit or can be downloaded, free of charge,
from the Extron website (www.extron.com).
To install from the disc, insert the disc into the DVD-ROM drive of the computer and
follow the same procedure as for
Configurator programs (see page 18).
To install from the Extron website (www.extron.com), select the
click the Software tab. Locate the Firmware Loader and click
on-screen instructions to complete installation.
TLP 1000MV and TLP 1000TV • Configuration Software
volume settings (see page 15) in the on-screen menus.
Extron Firmware
page, or using GUI Configurator. Before starting,
installing the GUI Configurator and Global
main
Loader,
tab and
Download
Download . Follow the
21