Updating Firmware From A Web Browser - Extron electronics TLP 1000MV User Manual

Updating Firmware From a Web Browser

1. Power on a computer that is connected to the same network as the TLP 1000.
2.
From the Extron website (www.extron.com), download the firmware for the
touchpanel. Click the
Firmware
3.
Navigate to the touchpanel firmware and click
4.
This downloads the firmware to your computer. Note the folder in which the firmware
file is saved.
5.
Open your browser and type the IP address of the TLP 1000 unit into the address box.
The browser opens the
Figure 25.
6.
Click the
Firmware Upgrade
7.
Use the
step 4.
8.
Click
Upload
Please Wait...". When the firmware is uploaded, the screen shows the message
"Restarting...". Once the firmware is installed, the panel can be calibrated using the
on-screen menus
Download tab on the Extron home page and select the
option (see figure 23).
TouchLink panel web pages
Firmware Upgrade Web Page
Configuration tab at the top of the page and then select
from the bar on the left.
button to navigate to and select the firmware file that was saved in
Browse
. The Touchpanel screen shows the message "Firmware Uploading...
(see page 14) or the
TLP 1000MV and TLP 1000TV • Configuration Software
.
Download
(see page 19).
TouchLink panel web pages (see page 19).
23