Configuration Software; The Configuration Software; Installing The Software; Gui Configurator And Global Configurator Installation - Extron electronics TLP 1000MV User Manual

Configuration
Software
This section of the user guide provides information about:
•
•
•
•
•
•

The Configuration Software

Create a graphical user interface (GUI) for the TouchLink panel in two steps:
1.
2.
The GUI Configurator software is a Windows-based application. The interface is designed
either by customizing an existing template or by designing an entirely new interface. GUI
Configurator offers several templates to manage control system devices.
After the GUI has been designed on a PC, the project is saved, built, and uploaded to
the TouchLink panel to verify what it looks like on the screen. It is then imported from
the TLP unit to Global Configurator where control functions are assigned to the text and
graphic items in the layout. After assigning the control functions, the project is rebuilt and
uploaded to the controller.
These two programs provide versatility and adaptability for configuration and control of an
AV system as it grows and evolves.

Installing the Software

GUI Configurator and Global Configurator Installation

NOTE:
Insert the disc provided into the DVD-ROM drive of the computer. If the setup program
does not start automatically, run
My Computer
Install
By default, the Installer program creates and places the GUI Configurator program in the
C:\Program Files\Extron\GUI Configurator
the Windows desktop.
The Configuration Software
Installing the Software
Using the TouchLink Panel Web Pages
Updating the Firmware
Using GUI Configurator
Using Global Configurator
Design the layout of the text and graphics
Assign functions to the text and graphics
You must use Global Configurator 3.1 or a later version and
GUI Configurator 1.2 or a later version to configure the TLP 1000MV or
TLP 1000TV.
. Select the
Software
. Follow the on-screen instructions.
TLP 1000MV and TLP 1000TV • Configuration Software
using GUI Configurator.
using Global
Launch.exe from the DVD-ROM directory in Windows
tab, locate the GUI Configurator program and click
folder. An icon may also be placed on
Configurator.
18