Verilink DIDCSU 2912 Manual page 98

DIDCSU E1 Version
Table 4-14 Net Port Alarm Threshold Configuration Menu Parameters
Command
Pn Alarm Reporting: Enabling alarm reporting transmits alarm messages to
both the ASCII interface and Node Manager. If this option is set to No,
Dn
alarms will not be reported. The LEDs turn red in an alarm condition. Set
this option to No when configuring the node. Set to Yes during normal
operation.
Fn Loss-of-Frame (LOF) Threshold/LOF Interval: Use this option to indicate
an interval that is greater than the threshold.
Ln Loss-of-Signal (LOS) Threshold/LOS Interval: Use this option to indicate an
interval that is greater than the threshold.
If LOS occurs, troubleshoot this situation first and ignore all other
alarms. (There will be other alarms.) This is the most severe alarm.
Rn Remote Alarm Indication (RAI) Threshold/RAI Interval: Use this option to
indicate an interval that is greater than the threshold.
An Alarm Indication Signal (AIS) Threshold/AIS Interval: Use this option to
indicate an interval that is greater than the threshold.
Bn Bipolar Violation (BPV) Threshold/BPV Interval: Use this option to indicate
an interval that is greater than the threshold.
En Errored Seconds (ES) 15 min. Threshold/ES 24 hr. Threshold: An ES alarm
indicates a second with one or more errors.
4-26
Description
Verilink DIDCSU 2912 User Manual
Options
Yes or No
(Y/N)
Threshold:
1—86400
0 to disable
Interval:
3—86400
seconds
Threshold:
1—86400
0 to disable
Interval:
3—86400
seconds
Threshold:
1—86400
0 to disable
Interval:
1—86400
seconds
Threshold:
1—86400
0 to disable
Interval:
1—86400
seconds
Threshold:
1—86400
0 to disable
Interval:
1—86400
seconds
15 minute
Threshold:
1—900
0 to disable
24 hour
Threshold:
1—86400
0 to disable