Net Port Alarm Menu - Verilink DIDCSU 2912 Manual

DIDCSU T1 Version
Figure 3-17 Net Port Alarm Threshold Status Menu
-- DIDCSU 2912 NET PORT ALARM THRESHOLD STATUS MENU -- -- DIDCSU 2912 NET PORT ALARM THRESHOLD STATUS MENU --
-- DIDCSU 2912 NET PORT ALARM THRESHOLD STATUS MENU -- -- DIDCSU 2912 NET PORT ALARM THRESHOLD STATUS MENU --
Current Threshold Status Current Threshold Status
Current Threshold Status Current Threshold Status
LOF counts(exceeded) LOF counts(exceeded)
LOF counts(exceeded) LOF counts(exceeded)
interval interval
interval interval
LOS counts(exceeded) LOS counts(exceeded)
LOS counts(exceeded) LOS counts(exceeded)
interval interval
interval interval
RAI counts(exceeded) RAI counts(exceeded) RAI counts(exceeded) RAI counts(exceeded)
interval interval interval interval
AIS counts(exceeded) AIS counts(exceeded) AIS counts(exceeded) AIS counts(exceeded)
interval interval interval interval
BPV counts(exceeded) BPV counts(exceeded) BPV counts(exceeded) BPV counts(exceeded)
interval interval interval interval
ES 15min counts(exceeded) ES 15min counts(exceeded) ES 15min counts(exceeded) ES 15min counts(exceeded)
ES 24hr counts(exceeded) ES 24hr counts(exceeded) ES 24hr counts(exceeded) ES 24hr counts(exceeded)
SES 15min counts(exceeded) 0(N) SES 15min counts(exceeded) 0(N) SES 15min counts(exceeded) 0(N) SES 15min counts(exceeded) 0(N)
SES 24hr counts(exceeded) SES 24hr counts(exceeded)
SES 24hr counts(exceeded) SES 24hr counts(exceeded)
X) exit this screen X) exit this screen
X) exit this screen X) exit this screen
[1,1] DIDCSU 2912 > [1,1] DIDCSU 2912 >
[1,1] DIDCSU 2912 > [1,1] DIDCSU 2912 >

Net Port Alarm Menu

Figure 3-18 Net Port Alarm Menu
-- -- DIDCSU 2912 NET PORT ALARM MENU -- DIDCSU 2912 NET PORT ALARM MENU --
-- -- DIDCSU 2912 NET PORT ALARM MENU -- DIDCSU 2912 NET PORT ALARM MENU --
N) NMS Address N) NMS Address N) NMS Address N) NMS Address
A) Card Alarm Reporting A) Card Alarm Reporting A) Card Alarm Reporting A) Card Alarm Reporting
C) Configure Thresholds C) Configure Thresholds C) Configure Thresholds C) Configure Thresholds
O) Display Alarm Buffer O) Display Alarm Buffer O) Display Alarm Buffer O) Display Alarm Buffer
X) exit this screen X) exit this screen X) exit this screen X) exit this screen
A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 >
3-26
PORT 1 PORT 1
PORT 1 PORT 1
2(N) 2(N)
2(N) 2(N)
2 2
2 2
2(N) 2(N)
2(N) 2(N)
2 2
2 2
0(N) 0(N) 0(N) 0(N)
1 1 1 1
0(N) 0(N) 0(N) 0(N)
1 1 1 1
0(N) 0(N) 0(N) 0(N)
1 1 1 1
0(N) 0(N) 0(N) 0(N)
0(N) 0(N) 0(N) 0(N)
1157(N) 1157(N)
1157(N) 1157(N)
When finished reviewing the performance/status information,
enter "X" to return to the Main Menu.
To access the Net Port Alarm Menu from the Main Menu, enter
"A". Use this menu to set alarm threshold values, monitor alarm
status, and set other alarm parameters. All monitored conditions
are reflected by the LED states. Note that alarm reporting must be
enabled at two levels: at each port and for the entire module. The
port alarm reporting is enabled using the Net Port Alarm
Threshold Configuration Menu,
128.0.0.0 128.0.0.0 128.0.0.0 128.0.0.0
NO NO NO NO
S) Alarm status S) Alarm status S) Alarm status S) Alarm status
Tn) Set Default Thresholds Tn) Set Default Thresholds Tn) Set Default Thresholds Tn) Set Default Thresholds
Verilink DIDCSU 2912 User Manual
PORT 2 PORT 2
PORT 2 PORT 2
0(N) 0(N)
0(N) 0(N)
0 0
0 0
0(N) 0(N)
0(N) 0(N)
0 0
0 0
0(N) 0(N) 0(N) 0(N)
0 0 0 0
0(N) 0(N) 0(N) 0(N)
0 0 0 0
0(N) 0(N) 0(N) 0(N)
0 0 0 0
0(N) 0(N) 0(N) 0(N)
0(N) 0(N) 0(N) 0(N)
0(N) 0(N) 0(N) 0(N)
0(N) 0(N)
0(N) 0(N)
Figure 3-19.