Data Port Configuration; Setting Alarm Parameters - Verilink DIDCSU 2912 Manual

Data Port
Configuration
Figure 2-20 Configuration Menu
A [0.0.0.204] [1,2] DIDCSU 2912 > c A [0.0.0.204] [1,2] DIDCSU 2912 > c A [0.0.0.204] [1,2] DIDCSU 2912 > c A [0.0.0.204] [1,2] DIDCSU 2912 > c
-- DIDCSU 2912 CONFIGURATION MENU -- -- DIDCSU 2912 CONFIGURATION MENU -- -- DIDCSU 2912 CONFIGURATION MENU -- -- DIDCSU 2912 CONFIGURATION MENU --
P) T1 port P) T1 port
P) T1 port P) T1 port
X) exit this screen X) exit this screen X) exit this screen X) exit this screen
A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 >
A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 >
Figure 2-21 Data Port Configuration Menu
-- -- -- -- DIDCSU 2912 DATA PORT CONFIGURATION MENU -- DIDCSU 2912 DATA PORT CONFIGURATION MENU -- DIDCSU 2912 DATA PORT CONFIGURATION MENU -- DIDCSU 2912 DATA PORT CONFIGURATION MENU --
In) In) In) In) In Service In Service In Service In Service
Mn) Mn) Mn) Mn) Data Port Mode Data Port Mode Data Port Mode Data Port Mode
Cn) Cn) Cn) Cn) Clock Option Clock Option Clock Option Clock Option
On) On) On) On) Enable LOS detection Enable LOS detection Enable LOS detection Enable LOS detection
Ln) Ln) Control Lead Mode Control Lead Mode
Ln) Ln) Control Lead Mode Control Lead Mode
SRn) Forced DTR/DSR SRn) Forced DTR/DSR
SRn) Forced DTR/DSR SRn) Forced DTR/DSR
SSn) Forced RTS/CTS SSn) Forced RTS/CTS
SSn) Forced RTS/CTS SSn) Forced RTS/CTS
SDn) Forced LLB/DCD SDn) Forced LLB/DCD
SDn) Forced LLB/DCD SDn) Forced LLB/DCD
SMn) Forced RLB/TM SMn) Forced RLB/TM
SMn) Forced RLB/TM SMn) Forced RLB/TM
Cable Cable Cable Cable
DPL Loopback DPL Loopback DPL Loopback DPL Loopback
Test Pattern Test Pattern Test Pattern Test Pattern
Test Error Counter Test Error Counter Test Error Counter Test Error Counter
X) exit this screen X) exit this screen X) exit this screen X) exit this screen
A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 >
A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 >
Setting Alarm
Parameters
24. From the Configuration Menu, select option "D" to access the
Data Port Configuration Menu.
D) data port D) data port
D) data port D) data port
PORT 1 PORT 1 PORT 1 PORT 1
YES YES YES YES
DCE DCE DCE DCE
ST ST ST ST
NO NO NO NO
AUTO AUTO
AUTO AUTO
DSR/LOW DSR/LOW
DSR/LOW DSR/LOW
CTS/LOW CTS/LOW
CTS/LOW CTS/LOW
DCD/LOW DCD/LOW
DCD/LOW DCD/LOW
TM /LOW TM /LOW
TM /LOW TM /LOW
DTR/LOW DTR/LOW
DTR/LOW DTR/LOW
RTS/LOW RTS/LOW RTS/LOW RTS/LOW
LLB/LOW LLB/LOW LLB/LOW LLB/LOW
RLB/LOW RLB/LOW RLB/LOW RLB/LOW
PRESENT PRESENT PRESENT PRESENT
DISABLE DISABLE DISABLE DISABLE
NONE NONE NONE NONE
0 0 0 0
25. In the Data Port Configuration Menu, type "I1", respond by
typing "Y", to place Data Port 1 in service. Type "I2", then "Y",
to place Data Port 2 in Service.
26. Use "C1" and "C2" to set both data ports to ST clocking.
27. Type the letter "O" and the number "1", then "1" to disable
LOS Detection for Data Port 1. Type the letter "O" and "2", then
"1" to disable LOS Detection for Data Port 2.
When normal E1 service is interrupted, errored, or lost, an alarm is
triggered. Enable alarm reporting for the E1 and data ports you
want to monitor.
Verilink DIDCSU 2912 User Manual
DIDCSU 2912 Quick Set-Up
PORT 2 PORT 2 PORT 2 PORT 2
YES YES YES YES
DCE DCE DCE DCE
ST ST ST ST
NO NO NO NO
AUTO AUTO
AUTO AUTO
DSR/LOW DSR/LOW
DSR/LOW DSR/LOW
CTS/LOW CTS/LOW
CTS/LOW CTS/LOW
DCD/LOW DCD/LOW
DCD/LOW DCD/LOW
TM /LOW TM /LOW
TM /LOW TM /LOW
DTR/LOW DTR/LOW
DTR/LOW DTR/LOW
RTS/LOW RTS/LOW RTS/LOW RTS/LOW
LLB/LOW LLB/LOW LLB/LOW LLB/LOW
RLB/LOW RLB/LOW RLB/LOW RLB/LOW
PRESENT PRESENT PRESENT PRESENT
DISABLE DISABLE DISABLE DISABLE
NONE NONE NONE NONE
0 0 0 0
2-17